This dee ring adapter is made for the new APX radio cases used in Ontario EMS and Fire services.
It connects…
Model
04-DRAPX
Heavy Duty Swivel Belt Loop (Motorola compatible) Swivel Belt Loop, Motorola HA Compatible
This is a full grain cowhide leather belt loop. It fits the Motorola High Activity swivel stud but provides a belt-hugging tight fit that will keep your radio close and secure. The stainless steel plate with 5/8 inch slot functions exactly like our original 04-05 quick-disconnect swivel allowing for quick access.
The 8 oz. black cowhide is stitched closed and riveted also to provide extra long wear for years of service.
Shown on one of our Police belts that is 2.25 inches wide....see more
Swivel Belt Loop, Motorola HA Compatible
This is a full grain cowhide leather…
Swivel belt loop for Harris/MA-Com style swivel. This model has a .5" wide slot. The directional Pull-The-Dot snaps allow for easy attachment and removal. The leather is 2.9 inches wide and 4.25 inches long when closed. This item is an alternate to Harris #19B226627G2, H9HC5E, KRY1011609/1, P5HC20 and similar parts.
3" swivel belt loop for Harris/MA-Com style swivel.
This model has a .5" wide slot. The…
Model
04-05
Swivel Belt Loop, Compact This is our Compact Swivel Belt loop. It is designed to fit snugly on a 2 1/4 inch wide gun belt.
The steel bracket is nickel plated, and riveted onto 8 oz. full grain cowhide....see more
This is our Compact Swivel Belt loop. If it designed to fit snugly on a 2…
This leather belt loop works with the original Motorola Style swivel.
It fits up to 2.25" wide belts.
…
Model
04-03
Swivel Belt Loop, Velcro closure Swivel belt loop with Velcro closure. This model uses overlapping leather flaps with Velcro to provide a secure attachment to your belt....see more
Swivel belt loop with Velcro closure. This model uses overlapping leather flaps with Velcro to provide a secure attachment to…
Swivel Stud Harris/GE This swivel stud fits the Harris bracket on the back of most portables like the XG-75, LPE, P7100, etc.
The base and the swivel stud are both stainless steel and will last the life of your radio.
Installation is easy as it just slides into the bracket on the radio.
To remove it from the radio a small screwdriver is inserted into a hole at the bottom edge of the bracket and the flat spring is raised up so it can slide off.
This is an improved version of the Harris #KRY1011608/1, and stronger that the FM-017262-001 which was designed as a retainer for use with a leather case.
The radio is inverted and the stud slides into the belt loop slot. When worn on a belt this allows for a comfortable carry and quick disconnect....see more
Swivel Belt Loop for Harris radios
This swivel stud fits the Harris bracket…